FREE ENERGY FROM THE OUTSIDE AIR
An air source heat pump makes heating your home and hot water much cheaper. You can reduce your heating costs by up
to 60%, although the exact figure depends on several factors such as where you live, the size of your house and the fuel you are replacing.
The initial investment is relatively low since an air source heat pump, unlike a ground source heat pump, does not require any drilling and most of the time, no planning permission.
A Jaspi air source heat pump is up to three times more efficient than a boiler. With conventional oil and gas boilers, 1 kWh of input energy provides less than 1 kWh of output energy. Using a Jaspi air source heat pump every 1 kWh of input energy is converted into a 3-4 kWh of output energy. There is no escaping the obvious conclusion – a heat pump is the absolute best way to get low cost heating and hot water.
JASPI COMFORT MONO HEAT PUMP 12kW + ULTRASTORE 500
These heavy-duty air to water heat pumps combine the latest compressor technology, smart controls and ease of installation. These pumps are designed to work at Nordic temperatures with high efficiency and reliability. Lower running noise and an intuitive control panel (Jaspi MCU) are a further evidence of the quality.
The most efficient and practical way to use a heat pump, is to connect it to a accumulator which works as an efficient buffer between the heat production and use. Also, if you would like to use the existing oil / gas boiler or want to add a wood burner to the system, then an accumulator is essential.
In this package, the heat pump will connect directly to the Ultrastore 500 accumulator and the work can be completed by your plumber, no need to handle refrigerants or install extra heat exchangers. If there is an existing boiler or a wood burner, these will connect up to the Ultrastore 500. Furthermore, the Ultrastore 500 can also be connected to the solar panels and can be fitted with up to three back-up immersion heaters.
From Ultrastore, you can take out heating and mains pressure domestic hot water circuits.
JASPI COMFORT MONO AIR SOURCE HEAT PUMP
EFFICIENCY - Compressor control
High efficiency at low ambient temperatures. The compressor is operated and controlled in such a way as to be efficient even at low ambient temperatures.
QUALITY - Hard-wearing materials
The JASPI heat pumps are constructed using particularly hard-wearing materials to guarantee long service life even in harsh outdoor conditions.
POWER - Low start-up current
Prevents interference with other electronic devices. Jaspi Comfort has an inverter-driven compressor for a low start-up current. The slow start-up and gradual move up to required capacity prevents interference with other electronic devices in the building.
COMFORT - Fan motor and blade
Driven by an energy-saving motor, the fan’s speed varies so only the required amount of air is used. The blades are specially designed to move as much air as possible at the lowest noise level.
MAIN SPECIFICATIONS
JASPI COMFORT MONO 8kW / 12kW
Max outgoing heating water temperature 58 °C
Refrigerant quantity (R410A) 2.55 / 2.9 kg
Height (incl. feet) 900 / 995 mm
Width 1025 / 1145 mm
Depth 420 / 450 mm
Weight 90 / 105 kg
JASPI ULTRASTORE 500 ACCUMULATOR
Capacity 500L
Max. working pressure 3 bar
Height (incl. feet) 1810 mm
Width 670 mm
Depth 675 mm
Weight 230 kg
Delivery includes; Jaspi Comfort Heat Pump, Jaspi Ultrastore 500 accumulator, MCU heat pump control centre, ground installation bracket, motorised valve & condense discharge pipe.
